Welcome to the second post.
Today we’re going to explore the Alto-scope’s performance. The specifications of my little Alto-scope should be as follows:
Sample Rate: 150 Ksps
Analogue Bandwidth: 15Khz
Input Voltage Range (1x) : 0-5V
Triggering: Rising Edge level trigger
Singleshot mode: Yes
So how are we going to test this? With a whole slew of signals of course. Sqaures, Sines, Triangles!
Enjoy! And don’t forget to check for part 3 where I explain how you too can build your own Alto-Scope.
Prototalk 